lef over axial How??

[429258]

has any one realy don this leaf over axial thing . i was wanting to do that and in the rear and put soom new springs in the front thet add on 4 inch what do you think

 

[Robb]

It has been done many times. If you do a search for SOA, I am sure you will get a lot of info. With a SOA, you will get about 5.5", so the front may sit a little low. If that is the case on your truck, the addition of coil spacers will help you out.

Welcome Aboard!!

Robb

 

[429258]

thatnks man for the help i have been reading for two days now and didnt finde any thing thaks

 

[429258]

i would realy like to get a list of all the parts needed and how hard it was to do it if that isnt to much to get

 

[unclemeat]

Superlift 5.5-inch lift uses a SOA. I believe that many Skyjacker lifts use the Superlift rear SOA. You will also need to lengthen brake lines. Keep searching lots of info on the site.