Originally posted by section525
tu palier mas largo?
Originally posted by 2001ExpSport
The components of this kit are almost identical to the Trailmaster kit with a few exceptions. Trailmaster includes a crossmember drop bracket for the transmission which strengthens the torsion bar supports. It uses the same tube system for the steering and spindle extension which is inferior to Superlift's one piece spindle which keeps all steering components in stock location.
As for using the stock driveshafts, extended driveshafts are required. You can use the stock front shaft, but it is stretched to it's limit. We had to replace the front shaft on the X we installed this kit on(Trailmaster). The rear shaft does not have to be replaced on either the 2dr or 4dr.
I am not saying this is a bad deal, but I am not saying it is good either. I have always believed in "you get what you pay for". I would investigate who makes it. What metals do they use and what stock. I would rather have trusted parts holding my suspension together while going 65 down the expressway.
Just some things to think about.
*********************************
Explique por favor quién hace el kit, cómo esta' bien él se realiza y cuánto tiempo usted lo ha tenido. ¿La placa de la resbalón viene con el kit o cuesta extraordinariamente?
También, los kits aquí son muy similares a su kit y requieren un árbol delantero extendido. ¿Qué usted hizo para mantener el eje común?
Gracias...
Originally posted by Harry5150
Your truck & kit looks great.
Do you sell the rear shock / swaybar mount seperately?
Is the rear brake line extended?
Originally posted by Fenix
Kit we made it in Argentina, hece in steel of 5mm and I have had it in my Explorer by but of 2 years.
If one talks about SKIN PAD they do not come with the Kit .
When axis speech refiereal cardan joint?
Adrian www.explo.8m.net
Originally posted by 2001ExpSport
¿Sí, usted tuvo que instalar un empalme doble del cardon en el árbol delantero?
Originally posted by Fenix
No fue necesario reemplazar ni modificar el cardan delantero, ya que al colocar el Lift de 4" el cardan solo se estira 1cm., practicamente nada y al no tener movimiento el eje delantero no es necesario reemplazarlo.
Adrian www.explo.8m.net
Originally posted by 2001ExpSport
Las gracias, lo pienso dependo del año del explorador porque algunos individuos han tenido que substituir sus ejes motores delanteros y algunos no tienen.