Line output converter

[Mattd76]

I have a 1998 mountaineer with the mach audio system and im trying to hook up a line output converter so i can use my alpine sub and amp. Can somoene tell me what wires i need to hook the converter up to. I need to know what wires are positve and negative.

 

[Beastb15]

I have a 1998 mountaineer with the mach audio system and im trying to hook up a line output converter so i can use my alpine sub and amp. Can somoene tell me what wires i need to hook the converter up to. I need to know what wires are positve and negative.

Hook it to your speaker wires.


Left Front (+) Orange/Light Green
Left Front (-) Light Blue/White
Right Front (+) Dark Green/Orange
Right Front (-) White/Light Green
Rear Speakers 6" x 8" Rear Doors
Left Rear (+) Gray/Light Blue
Left Rear (-) Tan/Yellow
Right Rear (+) Orange/Red
Right Rear (-)

 

[Mattd76]

Is there anyway i can use the factory sub output or will that not work

 

[Beastb15]

Is there anyway i can use the factory sub output or will that not work

Wish I could help ya on this one, however I have never had an X with a factory sub. I don't have the slightest clue how Ford setup their factory sub/amp

 

[Infinity08]

If the system is anything like the newer Machs, the subwoofer outputs are already line-level, they just don't have any RCA ends on them. I don't have a diagram of an X, but I may be able to find where I converted a Mustang, and we'll see if it matches up.

 

[Mattd76]

Thanks for the replies but I am going to use my brothers sony head unit as a temporary set up. He forgot to mention that he still had it otherwise i would have set it up with it from the start.