Randal143
New Member
- Joined
- September 28, 2018
- Messages
- 8
- Reaction score
- 0
- City, State
- Clarksville, ar
- Year, Model & Trim Level
- 2002 xlt
2002 Explorer XLT 4X4 4.0 186K MILES. Truck broke a rod, after sitting for about 2 years I installed a donor out of an '00. Transmission was fine at the time of engine failure. I competed the engine install, transmission only uses what I think is P, R and 3rd gear. I have the following codes:
P0743
P0755
P0760
P0797
P1747
P1789
I did use a jack under pan, carefully, to align motor to trans. I have the pan off now, the filter was cracked but there's no burnt spots on the solenoid circuit board.
Any help appreciated.
P0743
P0755
P0760
P0797
P1747
P1789
I did use a jack under pan, carefully, to align motor to trans. I have the pan off now, the filter was cracked but there's no burnt spots on the solenoid circuit board.
Any help appreciated.