cerberusaardvark
Well-Known Member
- Joined
- September 7, 2009
- Messages
- 331
- Reaction score
- 2
- City, State
- San Diego
- Year, Model & Trim Level
- 1994 Explorer xlt
im parting up for a mild rebuild of my engine. ive got clearwater heads all dressed up with valves/ valve train, new gasket set, new radiator, water pump, fan clutch and other assorted parts.
ive heard that if you want to install new lifters and pushrods you need to install a new cam as well.
my constraint is that the block need to stay in the truck, as i dont have a stand or crane. that means no cam, no pistons, no piston rings, no bearings, as much as i would like to do them.
im not looking for any modding, just making it a reliable stock motor for another few years.
ive heard that if you want to install new lifters and pushrods you need to install a new cam as well.
my constraint is that the block need to stay in the truck, as i dont have a stand or crane. that means no cam, no pistons, no piston rings, no bearings, as much as i would like to do them.
im not looking for any modding, just making it a reliable stock motor for another few years.