wirelessdog
New Member
- Joined
- November 30, 2012
- Messages
- 1
- Reaction score
- 0
I have a '95 Explorer new to me. It failed inspection due to having no tail lights, turn signals and dash lights. I found one blown and one missing fuse respectively which I replaced. Promptly following their replacement I smelled something electrical burning but was unable to isolate it.
Now, the truck won't start. It won't turn over, if I jump the solenoid it will turn over but not start. I also noticed that the power windows no longer work if that is relevant.
I'm not even sure where to start on this one.
Now, the truck won't start. It won't turn over, if I jump the solenoid it will turn over but not start. I also noticed that the power windows no longer work if that is relevant.
I'm not even sure where to start on this one.