so im going to be putting nos on to my truck,not now probably around Christmas.but i was going to mount a regular shark nossel injector into a throttle body space i have and be done with it.i really wanted to have a spray bar put in the plate i have but they want an extra $200+ to mount it in it.i also have an extra tank and injector laying around.i would like to go two stages,one in the tb plate and direct port into the intake manifold spacer i made but thats damn near $400 for just them taping and mounting it!!so i was on there site checking out there new pumps and what not when i came across this.
http://www.nitrousexpress.com/product-details.php?id=950
i know that the 4.6 plate will not fit the first gen 4.0.what i need to know is the measurements of the opening and over all width of the 4.6 tb.what im thinking is that i can have my machinist take it out the 4.6 and mount it in my plate for very cheap.i have a friend that has upgraded his solenoids to the new lighting solenoids so i could buy his for cheap and run a second stage,regular injector in the intake.yes i know im going to get a lot of replies about why and that's a lot of nos for a explorer but i luv nos and i built this motor around planning on spraying around a 150 shot so the question is,beside the measurements,is you all think i should just stick to one stage in the plate with a bar or think a regular injector will be just as good in the plate?:scratch:
o another awesome little thing im wishing i can get
http://www.nitrousexpress.com/product-details.php?id=1483
also anyone have any thoughts on fuel pumps?is there a replacement from another car or truck that would put out enough pressure where i wouldn't have to run an inline or standalone?this is the pump im thinking about,$131 isn't bad.
http://www.nitrousexpress.com/product-details.php?id=1504
http://www.nitrousexpress.com/product-details.php?id=950
i know that the 4.6 plate will not fit the first gen 4.0.what i need to know is the measurements of the opening and over all width of the 4.6 tb.what im thinking is that i can have my machinist take it out the 4.6 and mount it in my plate for very cheap.i have a friend that has upgraded his solenoids to the new lighting solenoids so i could buy his for cheap and run a second stage,regular injector in the intake.yes i know im going to get a lot of replies about why and that's a lot of nos for a explorer but i luv nos and i built this motor around planning on spraying around a 150 shot so the question is,beside the measurements,is you all think i should just stick to one stage in the plate with a bar or think a regular injector will be just as good in the plate?:scratch:
o another awesome little thing im wishing i can get
http://www.nitrousexpress.com/product-details.php?id=1483
also anyone have any thoughts on fuel pumps?is there a replacement from another car or truck that would put out enough pressure where i wouldn't have to run an inline or standalone?this is the pump im thinking about,$131 isn't bad.
http://www.nitrousexpress.com/product-details.php?id=1504