Eastcoastmod
Active Member
- Joined
- October 20, 2010
- Messages
- 86
- Reaction score
- 0
- City, State
- Halifax,
- Year, Model & Trim Level
- 2003 Explorer Limited 4.6
Problem New Springs from Canuck Motorsports. I can't get the top mount to fit over the new springs.
I had to reuse the rubber bushing, the urethane bushing and the steel top mount. the urethane bushing fits perfectly without the rubber installed but will not go on if I use the rubber.
I measured the top diametre of the spring and it appears to be about 1/2 inch wider.
Has anyone else that used these springs had any issues?
The truck is on the hoist and I am about to regret paying a shop and not doing this myself.
03 limited 4.6 4x4
I had to reuse the rubber bushing, the urethane bushing and the steel top mount. the urethane bushing fits perfectly without the rubber installed but will not go on if I use the rubber.
I measured the top diametre of the spring and it appears to be about 1/2 inch wider.
Has anyone else that used these springs had any issues?
The truck is on the hoist and I am about to regret paying a shop and not doing this myself.
03 limited 4.6 4x4