PIU770
Member
- Joined
- February 17, 2022
- Messages
- 19
- Reaction score
- 6
- Location
- Brooklyn, NY
- City, State
- Brooklyn, NY
- Year, Model & Trim Level
- 2016 Ford PIU
So I was hardwiring my dashcam and was using this little current tester thing that just lights up on contact.
Was toying around to see if it was grounded and poped in the cigarette lighter/12v/AC outlet where I charge my phone, and POP!...
Now it doesn't work.
I have a civilian console installed which has 3 12v ports only the one I blew was connected though, the second power harness that has a T shaped connector wasn't plugged in and is too short to reach the second receptacle at the storage compartment.
I'm not knowledgeable in electrical at all, what do I have to do to:
A. Get my original one under the stereo working again.
B. Perhaps connect the second one to a harness that is too short.
Thanks for your help.
Was toying around to see if it was grounded and poped in the cigarette lighter/12v/AC outlet where I charge my phone, and POP!...
Now it doesn't work.
I have a civilian console installed which has 3 12v ports only the one I blew was connected though, the second power harness that has a T shaped connector wasn't plugged in and is too short to reach the second receptacle at the storage compartment.
I'm not knowledgeable in electrical at all, what do I have to do to:
A. Get my original one under the stereo working again.
B. Perhaps connect the second one to a harness that is too short.
Thanks for your help.