GbMichael1972
New Member
- Joined
- September 19, 2018
- Messages
- 8
- Reaction score
- 0
- Location
- Indianapolis, IN 46227
- City, State
- Indianapolis, in
- Year, Model & Trim Level
- 1993 Explorer XLT
My rear left window on my 1993 Explorer XLT Will not roll down. The motor works in both direction when I apply direct voltage. If I leave the window down, and reconnect the wiring it will roll up with no problem. I have replaced the individual switch on the door, and tested the voltage at the motor. I measure a full 12 volt when I have the switch in the up position, but in the down I only read 8.5 volts. I am wondering what might be causing the voltage drop in the down position. Any help would be appreciated.