i got a grille that looks exactly like dirty dog's but i didn't trust the zip ties that came with the kit. what i did was go to the local hardware store and got little L brackets, washers, small head screws that i ground two sides into to fit between slots in grille and self tappers to go into factory grille. i cut out the guts(center) of the grille because it showed through and ta-da, custum install completed. i live in an area that the grille would have been stolen otherwise i would have zip tied it into place and i do have a spare grille for winter use. i do live in canada. as for the latch, i access it with a long thin screwdriver but i plan on changing my latch to a 98 style where the second catch is accessable through the gap between hood and grille once you pop hood. hope this helps. oh, i also noted that the mounting points for latch on newer style are different, so new hood or new holes, i'll figure it out later.