Rear shackle repair

[im2tall2]

I am getting ready to repair a rusted leaf spring shackle. I just bought the cheap replacements from autozone. I was wondering if I would also need to replace a bushings in the leaf springs as well. If so, how difficult is that. Also if any of you have any useful tips when repairing these, they are appreciated.

 

[gmanpaint]

Getting the shackles off is easy with an impact and some PB blaster. I had some bushings pressed in for me at a local shop once.

Tons easier with the spare off! The stock bottle jack works perfect between the frame rail and the leafs to line up the bolts. A nice heavy duty floor jack helps lifting the rear axle for alignment as well.

 

[im2tall2]

Ok that sounds good. I was just hoping i wouldnt have to replace the bushings if i didnt have to. Just hope they will stay in and not fall apart or anything where i would have to replace them Thanks!