Remote start installation

[LarryR]

Happy Fall everyone!!!

I recently purchased a remote start from Ford, but I'm having trouble locating the installation instructions. I have a 2010 Explorer Limited. The kit I purchased is part # AG1Z-19G364-A. The bidirectional remote start system. My local dealer was less than helpful. Anyone out there know how to get them? Any help would be appreciated!

 

[TowingExplorer]

I installed two of these kits so far, one on my old 2011 Fusion (1-way) and another on my mother's 2011 Milan (2-way). I bought a kit (2-way) for my dad's 2005 F-150, but he has yet to install it.

Anyway, you should be able to install manual online. I know, it sounds obvious. Too many sites are blocked at work for me to find it.

They're all generally the same I think within a generation of a vehicle. I've contemplated getting one for my 2006 but I've had it for 7 years now and dealt without so I probably won't shell out the $$ at this point.

I'll try to look around tonight if you don't find it by then.

 

[TowingExplorer]

Looking through my files, your kit is the exact same model I installed on my mother's 2011 Milan! I've got the PDF that I used, but it only mentions cars, no SUVs or Trucks.

My search suggested the kit you need is 9G1Z-19G364-A. I found the installation manual here starting on page 92. - http://machenry.com/documents/Installation Instructions/RMST/2010_Bronze_RMST_Truck_09_03_2009.pdf If you try with the kit you purchased, I would pay special attention to the jumper orientation.

Here's the programming instructions, which you'll use after the installation. http://www.fordservicecontent.com/f...ssory_files/Ford Programming Instructions.pdf

Best of luck, please let us know how it turns out!

 

[LarryR]

Thank you. I'll keep you updated.

 

[TowingExplorer]

Any update on this LarryR?