sswan60
New Member
- Joined
- January 18, 2007
- Messages
- 7
- Reaction score
- 0
- City, State
- St. Paul, MN
- Year, Model & Trim Level
- 1995
I am in the process of removing the transmission from a '95, 5spd, 2wd. I've got most everything apart and am just about ready to try to pull it. A couple of questions:
1. The top two bolts on the bell housing look tough to get to. Any tricks? Just try to reach up there with extensions?
2. Do I have to remove the exhaust down pipes to pull the transmission? Looks like I do but I pounded away at the down pipes/manifold bolts with an impact wrench without any movement. Therefore it looks like it will be a major pain to try to remove these down pipes. Rather not.
Thanks
1. The top two bolts on the bell housing look tough to get to. Any tricks? Just try to reach up there with extensions?
2. Do I have to remove the exhaust down pipes to pull the transmission? Looks like I do but I pounded away at the down pipes/manifold bolts with an impact wrench without any movement. Therefore it looks like it will be a major pain to try to remove these down pipes. Rather not.
Thanks