Splash Guards

[Pratinella]

Hi all - Looking for OEM rear splash guards for my 2001 Explorer XLT. Any ideas or suggestions?

 

[koda2000]

Hi all - Looking for OEM rear splash guards for my 2001 Explorer XLT. Any ideas or suggestions?

i don't know about OEM, but they're just a piece of heavy duty rubber after all. i got mine through RockAuto. i think they were around $18 each. they fit perfectly, look just like the OEM's and have held up well going on 2 years now. what can i say, they do their job.

 

[Pratinella]

Just checked RockAuto and they don't have them. I would take used or non-OEM, but want to try and stick with the molded type. Having trouble finding a part number even when I call dealership.

 

[koda2000]

Just checked RockAuto and they don't have them. I would take used or non-OEM, but want to try and stick with the molded type. Having trouble finding a part number even when I call dealership.

yes they do, but as i recall they're a bit difficult to find in their on-line catalog. i'll see if i can locate them for you. i think they're listed under Body-Exterior.

yep, that's where they're listed as "splash guards" and they're only around $8 now. as far as being molded, the OEM's were not molded either. it's starts life as a flat piece of rubber.

VARIOUS MFR Part # FO1250145 {#XL2Z16103AA}
Left Front fender splash shield
Part Image
$8.07

VARIOUS MFR Part # FO1251145 {#XL2Z16102AA}
Right Front fender splash shield
Part Image
$8.07

BTW, i recommend replacing the stock-style x-mas tree retainers with reusable push-pin rivets. Dorman part number for the rivets is 961-070. you need 10 of them, so you might see if you can get a larger package. probably be cheaper too.

 

[chefduane]

Hi all - Looking for OEM rear splash guards for my 2001 Explorer XLT. Any ideas or suggestions?

Are you looking for the splash guard that goes on the inner fender well or mudflaps? When I did my front upper balls I also replaced the splash guards with the RA ones. Direct fit and higher quality that the OEM ones.

If you are looking for OEM rear mud flaps, good luck. I've tried to find these everywhere with no luck. Even been to the 3 salvage yards local here in Dallas. Still no joy. Even Pedstang here on the site doesn't have them. And I just don't like the look/finish/fit of aftermarket flaps.

Let us know if you find a source.

 

[Pratinella]

Those are not the splash guards in question. My mistake...I have seen them referred to as splash guards or mud flaps. I am looking for rear mud flaps for my 01 Explorer XLT.

 

[koda2000]

Those are not the splash guards in question. My mistake...I have seen them referred to as splash guards or mud flaps. I am looking for rear mud flaps for my 01 Explorer XLT.

have you searched ebay? for example...

http://www.ebay.com/itm/OEM-FACTORY...rd|Model:Explorer&hash=item46262a8a94&vxp=mtr

 

[Pratinella]

Yes. I have searched ebay. The ebay link you provided was for front mud flaps. I need rear mud flaps. Thank you for your help. Very appreciated. The search continues!

 

[toypaseo]

I think I have both front and rear OEM ones, new in package, in my stockpile in my garage. I'll have to take a look. They were for my 96 XLT. Packages might be opened/damaged/crappy looking, but they were never installed.

PM me if interested...