steering column mountaineer

[peter griffith]

Well here I am in the shop and raining ourside and a steering comumn in my lap. I got the new steering column from Turdle but I messed up and dumped all my message so my pics are gone.

What I have is to know about the box that has to be changed out to match the key for my old column. It was told to me it was a seimens but all I see is a large white for box. I see not siemens box!!!! I have the key and ring from my old box ready to go into the new one. HELP

Peter

 

[Turdle]

Here is one picture. I'm going to move these posts to another thread for help

 

[Turdle]

Peter
Post the same question in this thread, I think you'll get your answer

http://www.explorerforum.com/forums/showthread.php?t=364540

 

[peter griffith]

I found it Jon. What threw me was there was not one on the column I got from you. I did have to super glue that little green contact on the outside for it would not hold in place. I have not forgotten you on the shipping. Dont worry I will be coming through for you

P

 

[Turdle]

I found it Jon. What threw me was there was not one on the column I got from you. I did have to super glue that little green contact on the outside for it would not hold in place. I have not forgotten you on the shipping. Dont worry I will be coming through for you

P

I'm more interested in you being able to use your truck right now-

 

[peter griffith]

WEll it is a wrestling match I can tell you that. there is one small yellow wire hooked to nothing with bare ends that I dont know what it goes to but if not important I am not going to worry with it.

P

 

[Turdle]

WEll it is a wrestling match I can tell you that. there is one small yellow wire hooked to nothing with bare ends that I dont know what it goes to but if not important I am not going to worry with it.

P

Cut that wire where it meets the other one and wrap that with tape. I think the yellow wire went to an aftermarket alarm.