alphabets13
Explorer Addict
- Joined
- January 27, 2002
- Messages
- 2,416
- Reaction score
- 9
- Year, Model & Trim Level
- 2004 Mountaineer Premier
as soon as i turn the key and the engine turns over, the rpm guage reads about 500 rpm and the engine stumbles, then about 2-3 seconds later it is just like something catches and the idle then jumps to about 1300rpm and is normal as it slowly lowers while the engine arms up.
also occasionally on startup the stumble last longer than 2-3 seconds and i have to give it gas to get the idle up and wait about 10 seconds or so for it to stabilize.
i don't think it is the iac because i replaced it about 2 years ago and have recently cleaned it. the only thing i have not done it cleaned the MAF. i know there is a write-up on here from snap-on that i printed out a while ago about cleaning it, but have not got around to doing it. can a dirty MAF cause this?
also occasionally on startup the stumble last longer than 2-3 seconds and i have to give it gas to get the idle up and wait about 10 seconds or so for it to stabilize.
i don't think it is the iac because i replaced it about 2 years ago and have recently cleaned it. the only thing i have not done it cleaned the MAF. i know there is a write-up on here from snap-on that i printed out a while ago about cleaning it, but have not got around to doing it. can a dirty MAF cause this?