swap to limited slip axle | Ford Explorer Forums

  • Register Today It's free!

swap to limited slip axle

kevinapg

Member
Joined
November 19, 2001
Messages
20
Reaction score
0
City, State
Jupiter, FL
Year, Model & Trim Level
2000 Sport
Is there a way to make a standard 3.73 axle a limited slip axle or should I just look around for a junked truck and swap out the entire rear end? I'd like the lim slip for towing, but they are really hard to find.
 






I would inquire about an aftermarket limited slip at your local 4X4 store. A new rearend at a salvage yard would probably be very expensive!! (for a tear 2000 + vehicle)
 






Kevin, your axle is the same as the 1991-2000 explorers. Except that the brakes were Drum from 91 till 94. So if you want to upgrade to LS, then all you would have to do, is get a LS carrier complete with spider gears, etc.... I would suggest that you get new Bearings, and maybe new clutches, both depending on how many miles on the LS carrier. You would have to re-use your Ring gear since it is already matched to your Pinion gear. Now let me tell you this, It could be a difficult process to get the correct ammount of backlash set, I believe you have to change shims, and stuff like that. If I were you, I'd have someone who know what they are doing, do the job for you. But my point here is that you do NOT have to change your Axle to obtain LS, just change your Carrier. Sometimes you can find LS carriers here in the For Sale Forum, or E-Bay, sometimes even the Jeep guys sell them when they put the 8.8 in their Jeeps. I hope I have helped out, if you have any questions, feel free to e-mail me......
 






forgot to mention...but it's in my sig

2000 Ford Explorer Sport with 3.73 rear gear.
 






Featured Content

Back
Top