t-case swap help?

[nissanboy]

what size are the flange bolts that hold my new front driveshaft to the t-case flange in the front. I need to order some so i can make it uwharrie this weekend.

 

[Robb]

lutft?

 

[nissanboy]

what the hell is that supposed to mean?

there are 4 bolts ont he double cardon joint side that hold the u joint to the t-case flange. I need to know where i can get those bolts or what size they are so i can go match them up to some at the hardware store.

 

[XplorerKid]

LUTFT = LOOK UNDER THE F-ing Truck
(didnt mean it in a mean way )

 

[nissanboy]

well if i had the bolts under the truck i wouldnt be asking now owuld i....

im swapping from som queer t-cse that dont use the falnge bolts up front to one that does. Now that i carried my driveshaft over to ther hardware store and found out they are 5/16 by 1.5" standard fine thread bolts i can say politely KMA! (kiss my A$$) in a nice way of course.

 

[410Fortune]

hahahaha oh man...

Ford stuff like this call your local ford parts dept and ask the guy, 90% of the time the guys can look on the micro fish and get the bolt specs for you over the phone....