dancedad
New Member
- Joined
- December 2, 2005
- Messages
- 4
- Reaction score
- 0
- City, State
- Mission, British Columbia
- Year, Model & Trim Level
- '95 xl
Six days after having my wifes transfer case repaired at a local garage, I was driving it to work and it gave up on me again.
I spent a hundred dollars to have it towed, back to the shop :fire: (50 miles)
I phoned the service manger the next morning to ask him what the problem was, he said that they had taken an oil sample and there were filings in the oil.
"Big surprise!!" I said "have you pulled it out yet to have a look?"
He said he couldn't do that until I authourized the work to be done
To make a long story short this jackass took me for 2600.00 dollars and refused to even pull the case to see what the problem was unles I was paying!
He said that based on the oil he looked at it must be the bearings and he did not feel it he was under any obligation to even check his work, even though he diagnosed and then decided on repairs. he replaced the shaft and fork in the t case.
Any way I will get to the point of this post, I had it towed home ($85.00) and am going to the wreckers tomorrow to pick up a t case,
Does anyone know what year t cases are compatible with 95 explorer? apparently this shop got two in and neither fit so they told me it was more economical to repair for 700.00 and give no warranty than buy one for 400. with a four month warranty, ha ha.
I have a line on a transfer case our of a '96 for $350.00 will this fit?
Thanks in advance for any help and for reading my long rant/post
.......I do feel better.
Just editing here, did some research and it looks like it has to be either a borg warner 1354 or 4405, sound right?
auto hubs with dash selector, can't find tag on case
I spent a hundred dollars to have it towed, back to the shop :fire: (50 miles)
I phoned the service manger the next morning to ask him what the problem was, he said that they had taken an oil sample and there were filings in the oil.
"Big surprise!!" I said "have you pulled it out yet to have a look?"
He said he couldn't do that until I authourized the work to be done
To make a long story short this jackass took me for 2600.00 dollars and refused to even pull the case to see what the problem was unles I was paying!

He said that based on the oil he looked at it must be the bearings and he did not feel it he was under any obligation to even check his work, even though he diagnosed and then decided on repairs. he replaced the shaft and fork in the t case.
Any way I will get to the point of this post, I had it towed home ($85.00) and am going to the wreckers tomorrow to pick up a t case,
Does anyone know what year t cases are compatible with 95 explorer? apparently this shop got two in and neither fit so they told me it was more economical to repair for 700.00 and give no warranty than buy one for 400. with a four month warranty, ha ha.
I have a line on a transfer case our of a '96 for $350.00 will this fit?
Thanks in advance for any help and for reading my long rant/post
.......I do feel better.

Just editing here, did some research and it looks like it has to be either a borg warner 1354 or 4405, sound right?
auto hubs with dash selector, can't find tag on case