Trim Removal...

[hostile413]

i searched for a thread about removing the fender trim on a 96 e.b. with no luck, its the trim that goes from the fender along the rocker panels to the rear fender, it looks pretty simple to remove, but my question is after i remove it, are ther holes under the trim that will show?..thought i'd ask before i remove it

 

[hostile413]

pic to go along with question

heres a link to a picture of my truck, the trim i want to remove is all the brown plastic trim, except on the front bumper
http://community.webshots.com/photo/429346096/429379395okrMvb

 

[FreeWheelin4x4]

On my 95 xlt there are holes.

 

[CDW6212R]

Yes, lots of holes. Use a trim removal tool, or a screwdriver with rounded edges, not sharp. Sit down and use your hands and screwdriver to get behind the trim. Gently get your fingers and the tool behind the trim, while not scrstching the paint. Use your hands to create leverage against the fender, pulling outward behind the trim.

You will need to pull the trim from each connector, outward, one at a time. Good luck,

 

[hostile413]

thanks for the info guys