jpacetti
Member
- Joined
- July 31, 2008
- Messages
- 14
- Reaction score
- 0
- City, State
- Winder, GA
- Year, Model & Trim Level
- 95 XLT
I have a 95 XLT with a Check Engine Light that comes on and goes off when it wants to. I tried hooking up up my code reader to the OBDII connector which gets power and shows its connected. But when I try to download any codes it just gives me an interface error and tells me to make sure the car is switched to on. I have the same problem if I try to clear the code.
My next thing I will do is to ring out the wiring between the ECM and the reader connector. It has been like this ever since I changed out a fuel injector. But the light remains intermittant and it runs great.
Has anyone had a similar problem with their ECM? Or any other ideas about what to check? Btw I did go back and recheck my injector installation and all the connectors I could shoot some electrical cleaner through.
My next thing I will do is to ring out the wiring between the ECM and the reader connector. It has been like this ever since I changed out a fuel injector. But the light remains intermittant and it runs great.
Has anyone had a similar problem with their ECM? Or any other ideas about what to check? Btw I did go back and recheck my injector installation and all the connectors I could shoot some electrical cleaner through.