- Joined
- January 20, 2000
- Messages
- 976
- Reaction score
- 2
- City, State
- McKinney, TX
- Year, Model & Trim Level
- 76 Bronco
4 Wheel parts just called and asked me to pick up the truck. When I showed up they gave me the invoice.
Part # 118 for the front coils! Yes, I was a little upset. They insisted, despite what I told them that #118 was the correct coils. After a short conversation, they called Superlift.
Superlift asked what motor I had in the truck, " The 4.0 "
and said that you could use #123 or #133, but that #123 might be to soft and collapse.
Needless to say 4 Wheel parts was a little upset at this point. Superlift, never sent out a notice that the #133 springs needed to be used for an Explorer lift with the 4.0 motor. All of 4 wheel parts books ( Supplied by Superlift ) and computers show that part # 118 is to be used. A company wide memo is going out at 4 wheel parts today about the change.
But, Buyer beware! Check the invoice and make sure you have the right part number for your coils. # 133
Part # 118 for the front coils! Yes, I was a little upset. They insisted, despite what I told them that #118 was the correct coils. After a short conversation, they called Superlift.
Superlift asked what motor I had in the truck, " The 4.0 "
and said that you could use #123 or #133, but that #123 might be to soft and collapse.
Needless to say 4 Wheel parts was a little upset at this point. Superlift, never sent out a notice that the #133 springs needed to be used for an Explorer lift with the 4.0 motor. All of 4 wheel parts books ( Supplied by Superlift ) and computers show that part # 118 is to be used. A company wide memo is going out at 4 wheel parts today about the change.
But, Buyer beware! Check the invoice and make sure you have the right part number for your coils. # 133