what do i need to put a auto in my 91 5speed

[9140]

i have a 91 4.0 4x4 with a 5 speed and i want to swap it for a 4 speed auto. i need to know what i need to get to swap it out. are the drive shafts the same? are the t-cases the same? is there a computer that comtrols the od and lock up on the stall? do i have to swap my harrnes if there is a computer for the auto? thanks for the help

 

[metstalker]

no computer simply driven by vaccume hoses and such ( from what ive been told a 5 speed is one of the better trannys to be put in an explorer why would you want it out?)

 

[9140]

cause when you shift you dont have any power to the wheels and you get stuck lol

 

[MrShorty]

You will need the computer for an automatic transmission to control 3-4 shift and TCC lockup. If you don't get the wiring harness with the computer and transmission, there will be some splicing that would need to be done.

 

[410Fortune]

column shifter, flexplate, torque converter, clutch block off plate, clutch pedal switch bypass, non clutch pedal brake pedal assembly, starter, wiring harness, computer, kick down cable, trans cooler & lines, and of course the transmission. with vent tube, & dipstick.

good luck! Took me 3 days, and a month to collect parts.

 

[superchef]

i have a 91 4.0 4x4 with a 5 speed and i want to swap it for a 4 speed auto. i need to know what i need to get to swap it out. are the drive shafts the same? are the t-cases the same? is there a computer that comtrols the od and lock up on the stall? do i have to swap my harrnes if there is a computer for the auto? thanks for the help

Too bad we live so far apart. I might have suggested we just park our rigs beside each other and swap the parts.
I am running a 93 auto but want to convert to 5 speed.

 

[9140]

Too bad we live so far apart. I might have suggested we just park our rigs beside each other and swap the parts.
I am running a 93 auto but want to convert to 5 speed.

ya that does suck

 

[410Fortune]

Keep looking, there are ALOT of members in FL and ALOT of A4LD owners would much rather have the 5 speed.

If I was you I would serisouly consider swapping in a different auto other then the A4LD, you are already going half way there, why not go the rest of the way and run a 700R4 or if you can live with 3 speed C4?

 

[bates]

Could a ratchet shifter be used? I think it would be cool to have a shifter on the floor.

 

[410Fortune]

My shifter was on the floor, I dont need it now that I am going 5.0L, wanna buy it?

hahaha

It seriously took me months to find this shifter and all the parts I needed to make it work. It is a 1986 Bronco II floor shifter and bell crank assembly, 2wd. The shifter is a factory A4LD unit.

Yes you can use many different cable floor shifters with the A4LD, however Artt Carr is the only one I know who actually makes a floor shifter that will shift the A4LD without modifications.

In one of our projects we used a B&M mega shifter, but it was extensivly modified to match the A4LD shift pattern and throw.

 

[9140]

Keep looking, there are ALOT of members in FL and ALOT of A4LD owners would much rather have the 5 speed.

If I was you I would serisouly consider swapping in a different auto other then the A4LD, you are already going half way there, why not go the rest of the way and run a 700R4 or if you can live with 3 speed C4?

how hard would the 700r4 be to put in?

 

[Brian_B]

I like the C5 (3 speed auto). It almost bolts in. I have one in my ranger and love it. Floor shift included. No OD though.

 

[9140]

i need the od. but i might just live with the 5 speed are they hard to rebuild?