Will this hub puller do the job?

[Swamp Fox]

For those in the know. I will be changing bearing for the first time soon on my '04 4WD Ex V6. Take a look at this hub puller and tell me if it will work for my needs in order to change front and rear. Thanks. http://www.alltradetools.com/catalog/rental-loaner-tools/444-648643-2-pc-hub-puller-kit-kit-4.html

 

[EXPLORER04]

Will not work for the rear, you need a press for the rear

 

[IAmTodd]

That will work to get the hub off in conjunction with a slide hammer but you'll need a bearing press to get the actual bearing out.

http://www.harborfreight.com/fwd-front-wheel-bearing-adapters-66829.html

(Regarding the rear)

The front is just 3 bolts and your link plus a slide hammer will help to get the hub out of place.

 

[Swamp Fox]

All I'm worried about is being able to pull the hubs. I bought the assembly for all wheels. The back I will have pressed out and put in the new bearings at a local shop. Just want to be able to get things off. Sounds like I will be able to.

 

[scubastevesx]

used a hub puller on my 06 front bearings it helped alot just make sure to
push out your cv shaft i used a 4x rivet gun with a rubber edge skin
die to vib the shaft out it worked a treat