a_kraker99
Member
- Joined
- May 31, 2011
- Messages
- 16
- Reaction score
- 0
- City, State
- Zeeland, MI
I am just wondering what the best way to get a trailer brake wire from the controller back to the 7-way plug would be. Can I just undo the CHMSL from the fuse box and wire that into the brake controller so I don't have to run a new wire?
Also where does the CHMSL ground go? If that runs all the way to the front could I use that to run a 12v source to the plug or is that not a large enough gauge?
Also where does the CHMSL ground go? If that runs all the way to the front could I use that to run a 12v source to the plug or is that not a large enough gauge?
