WOOHOO!! Got the 3" blocks, but......

[SeanM]

NOW I NEED THE UBOLTS!!!

Trailmaster makes the length I need, but the threads are too big...I would have to drill out my shock plate....

Godfather or anyone else who has lowered their X 3 inches.......Where did you get your u-bolts???

 

[SeanM]

Well.....there's been 12 views and not one post.....come on guys....Where the heck is (Greg)Godfather when you need him???

 

[X24]

I got my bolts at autozone. I'm pretty damn sure they had a set that were big enough for 3".

 

[SeanM]

Well, I found an autozone about 25 miles away. I'm gonna try there this Friday (6/21)...We'll see if they have what I need.....Otherwise I'm gonna repost here...And the original u-bolts will NOT work...I'm using a 3" block which requires the u-bolts to be AT LEAST 3" longer.....

 

[Godfather 1138]

Bill used bolts that are probably simillar to the ones you found. He did in fact have to drill out his shock plates. Doing this will be a big favor to yourself though, as getting the smaller ones to fit are a PITA.

 

[X24]

Thats true. I had a helluva time getting mine to go around the axle and then through the holes on the shock plate.