Hey guys! how everyone doing? I just wanted to ask if anybody knows if they started making projector headlamp housing for the last generation sport trac...if not, then can someone tell me when theyll develop one
thanks guys
thanks guys
thats sweet! I have also considered a retrofit but havent had a clue how to do it...
can you send me info and instructions on how you did yours?
I too would love this
I'll be able to go into more detail when I get back from vacation, but basically I purchased everything I needed from The Retrofit Source (funny enough im going through with retrofitting my fog lights, and might be adding more lights a little later) and while I am not sure about the '01 for the 07+ explorers, it basically required to grind out a circle by the bulb (I can get a picture next week when I'm back) and just use some screws to secure it, hook it up, and your lights are now a million times better than the stock!
Like I said I can go into more detail next week.
Its been a month, where is it?
Sorry for the delay, unfortunately life got busy. My Grandmother past away on the 30th of august, and then I started up College again, all of that combined with work makes for a limited time frame, add on top of that, the fact I only come around here once in a while doesn't help the situation
I'm actually away from home for the weekend, but if you have anything specifically that you need help with I might be able to offer my assistance, let me know
Otherwise, the best way to describe the whole process in a general sense is that I cut out the back of the headlight housing, enough so that the FX-r would fit flush in the back (to a degree) then align it properly attach the shrouds, close up the headlights, wire the whole thing up then turn em on!
I know that isn't the best, but its what I have to work with currently, the hardest part is literally opening the headlights up.
For a more general guide, look for the PDF link under the picture @ this link
The only thing I would recommend is NOT to put the headlights in the oven, for me the housings started getting soft before the glue between the lens/body did. I used a heat gun and a HELL of a lot of patience, they are huge headlights.
I hope that helps some, again sorry it took so long.
Man I'm sorry for your loss.....
But yeah, Which kit did you buy the stage 3 or 4? And my only concern here is the alignment of the projectors, I hate myself because I am UBER picky about every single little detail LOL but another pair of housings would be easy for me to get, I work at a ford dealership. Oh yeah and one issue I might have are going to be my daytime running lights.....where are they gonna go out of? the projectors?
Can you tell me the exact same things you bought with your kit? i.e Shroud, bulbs, ballast, relay, etc. I dont wanna copy you but I just wanna get an idea what is compatible with the truck