my spring break.

[mmbretts]

so i decided to go see my master welder grandpa for a few days over spring break and i wanna show off some handywork.

gettin ready to replace the reese hitch.

done!

project 2:
RA bushings
done! after a little bit of wobbled hole restoration......

WOOT! no more clunk

we bent the trans xmember away from the cat. (no idea what i ran over to do that.)

now the fun begins. hehe

now remember... hes a retired master welder... dundundunnnnn

thats in primer...

this is how she sits now....

and today i got set up for a nice interior touch....

blue leds are comin next! (sorry about the blurry pic, i was driving)


then the plan is for a BL and 31x11.50 on some 15x8 aluminum. with a 3.73 swap out of the parts sploder.
then... i have a 302/np435/np205 combo just collecting dust in the building... who knows...

 

[LBarr2002]

The bumper looks great. Don't do a body lift for 31's... they'll fit without the lift. You might have to do a little trimming/hammering, but they look better stuffed to me than too tall. If you do a body lift, go 32's or 33's .

Or... get 2" lift springs or spacers.

 

[mmbretts]

we'll just have to see what she looks like.. i have a set of 31's and a single 32... it all depends on the wallet.

 

[r3dn3ck]

i put 31x10.5 on mine stock with no body work/trimming at all. no rubbing. 31's look way to small with a lift.