Joe93's 91 build up( d44 & 9inch swap, roll cage and more)

[95offroadx]

can you get a side shot of the whole truck with the chop and the cover on it, i love this idea!

 

[Joe93]

can you get a side shot of the whole truck with the chop and the cover on it, i love this idea!

i'll try and do that today.

 

[Joe93]

some more pics. first are the coils and the new coil seats. the second is mock up tryin to get all my parts located before the final instal.

 

[JS91X]

i bet..if your running fullsize bronco coils then id get the fullsize coil bucket and try mounting in the existing coil bucket mounts then weld it when you get it whrer it needs to be

 

[410Fortune]

Those are not TTB buckets pictured, I believe he already has you covered.
Add some F-250 shock towers and BAM Ford solid axle

 

[Kirby N.]

Looks good!

 

[Joe93]

yup those buckets are of a 78 bronco and eb coils. Curently the bucket is mover forward more then it is in the pic. So the angle is a little better. I have the f250 shock mounts already. Im going to get everything in there first before i mess with shocks and mounts. May do something other then f250 mounts. Thanks for your help Kirby. I owe ya one.

 

[Kirby N.]

I am off tomorrow. Did you get everything worked out? I could come over tomorrow and look it over if you still need me to.

 

[JoshC]

I am off tomorrow.....I could come over tomorrow and look it over if you still need me to.

Sure, come on over, i'll feed ya!

 

[Joe93]

I am off tomorrow. Did you get everything worked out? I could come over tomorrow and look it over if you still need me to.

I have to work tomorrow sad to say. Maybe im feelin kinda sick . i didnt like the way thing were. So i'm going to start over. I need to get the truck all level then start again. Picked up some steel so i can space out the buckets from the frame. Did really want to but looks like i have no choice.

 

[everythintech]

i know im a lil late, but i am going to chop my back too, i went and got estimates for the canvas back, and they make snaps that are directional, meaning to get them off you have to turn it a quarter turn. They recommended every other snap, they can be annoying and really mess up your paintjob if one breaks and flaps in the mind. just lettin ya know. oh by the way, hows that back hold up, i had the impression from my reading that the back could buckle or something from not having support?

looks real good man

chris

ps: we have to keep in touch, because mine is going to be a second look-a-like! coils and all. been planning, money is tight.

 

[Kirby N.]

Joe,
Let me know if you play hooky. I will send you my cell on PMs.

Josh,
I am not visiting you! I am still ticked that you rolled your truck!

Kirby

 

[JoshC]

Josh,
I am not visiting you! I am still ticked that you rolled your truck!

Kirby

 

[Joe93]

well I have everything where it needs to be. Drive shaft fits, coil buckets are in, radius arm mounts are in. Still need to do the trac bar mount and an adjustable trac bar and do the steering and then she will pretty much be done on the front. Here are some pics. Fisrt is final mockup of the suspension, and the second is the explorer sitting on on the tires.

 

[Kirby N.]

Sweet! Good Job! I bet it is a little scary with no Trac bar! Hows your driveshaft to Y pipe and Diff to crossmember clearance?

 

[Joe93]

Sweet! Good Job! I bet it is a little scary with no Trac bar! Hows your driveshaft to Y pipe and Diff to crossmember clearance?

Your tellin me i thought the damn thing was going to fall over getting the jackstands out. I havent checked the crossmember clearence yet. Ran out of time. it looks pretty close. may need to stepup to the coils your have. Your wana do me a favor kirby? after i get a track bar on there, you think i could test fit one of your 37's? I'll pay ya. I'm trying to keep it as low as i can and run 37's.

 

[Kirby N.]

No need to pay me. Just let me know when you are ready. I just got a 38 from a friend for a spare that is worn out and really close to the 37s. I can bring that over or you can just try a couple of mine. Let me know when you are ready!

 

[Joe93]

No need to pay me. Just let me know when you are ready. I just got a 38 from a friend for a spare that is worn out and really close to the 37s. I can bring that over or you can just try a couple of mine. Let me know when you are ready!

Sweet thanks. I'll let ya know when im ready. That spare should work i just need to get an idea of how much room i have.

 

[Joe93]

well here is the first test fit of a 38x12.50. Need to make some room for this thing. If I can make this fit then 37's shouldnt be a problem. I'm at about 6 inches of lift right now. After i put in my new coil seat i should be at about 7 inches. Dont really wana go any taller. So i need to start chopping up the fenders.

 

[Joe93]

here is the fender after some triming. Still have a few more things to do but looks like they will fit.