Acid0atm3al
Member
- Joined
- September 20, 2008
- Messages
- 34
- Reaction score
- 0
- City, State
- Nixa, mo
- Year, Model & Trim Level
- '93 xlt
built this enclosure for a customer, he wanted it 100% bare, no carpet, no terminals of any kind, so thats what he recieved
enclosure is 4.3ft^3 tuned to 35hz with 56 inches of port area.
my router took a crap on me, so i had to cut the holes with a jigsaw, Mcgyver'ed up a circle maker and scratched the circles deep with a screw, when doing this, the jigsaw blade naturally follows the groove made (with very little help)
the cut is a little rough and not perfect, but close enough for the buyer
i love my oldschool rockwell tablesaw, never have a bad cut with this thing.
all done
enclosure is 4.3ft^3 tuned to 35hz with 56 inches of port area.
my router took a crap on me, so i had to cut the holes with a jigsaw, Mcgyver'ed up a circle maker and scratched the circles deep with a screw, when doing this, the jigsaw blade naturally follows the groove made (with very little help)
the cut is a little rough and not perfect, but close enough for the buyer
i love my oldschool rockwell tablesaw, never have a bad cut with this thing.
all done