Summajet
Active Member
- Joined
- February 7, 2019
- Messages
- 78
- Reaction score
- 10
- Year, Model & Trim Level
- 2000 Mercury Mountaineer
I was removing my failed Water pump and the top left bolt broke off. It has the full thread inside. I got all of them removed except for the broken one. What is the best way to remove it being that it is broken off and has no visible threads to grab onto????
I put deep creek in the passage where the broke bolt is inside using seafoam deep creek. I placed the removable part of the broken bolt in the hole to hold the deep creek inside the passage in hopes it will loosen up. Was thinking of soaking it overnight. Then tomorrow hit it with a punch and use a left handed drill bit in hopes it will free the remaining broken thread of bolt???.
Thanks
I put deep creek in the passage where the broke bolt is inside using seafoam deep creek. I placed the removable part of the broken bolt in the hole to hold the deep creek inside the passage in hopes it will loosen up. Was thinking of soaking it overnight. Then tomorrow hit it with a punch and use a left handed drill bit in hopes it will free the remaining broken thread of bolt???.
Thanks