Search results

No I didn't. It's just a toy right now so it's not super pressing.

Jaked up the truck this morning...no change. Torqued on the torsion bolt and brought it up about a half inch. I can get a piece of paper in there now but that's about it.

This was actually in PA until about 2 years ago. Same difference. I'll get it up on stands this weekend and see how it looks. Hopefully I'll be able to get some decent pics.

It's connected still....bad angle. I tried moving the bar and it doesn't have any play....and on looking from the front, the arms on the PS is level but the DS looks a little low. I'm tempted to tweak it up and see what happens but I'm still trying to make heads or tails of this before...

Just picked up the truck used. Doesn't appear lifted but there's a bit of binding in the front and noticed what appears to be a rubbing torsion bar. I was under the impression that the bar is supposed to remain relatively centered as it passes through the hole. Pass side is fine, it's just...

I wasn't trying to be a snotty regarding whether you had read it or not; not intended to read that way. This is a good thread. I hope some more chime in with some more details for us.:salute: No worries...as you can see, I've been a member a LONG time and have had my share of...

Hey ya'll, I know it's been a while since I posted on the boards...but after some searching I think I found the right thread. Currently I've got a 97 Limited 5.0 with the auto climate crap (I just got done upgrading the plug so I could replace the blower motor module). Anyway, while running...

Been a long time since I've been on here, but looking to make some changes... I've got a few offers on my mustang an dthey include... a '96 ranger 4.0 auto with 96k miles. I assume the 4r55e. a '00 Monte 5.0 awd with 143k. I assume 4r70w Now everything I've read pretty much says...

was contemplating it. I did get the tongue done though...then had to take it out....then got it redone.

nothing heavy duty; just my driveway and the lot at my store

I'm not planning a lift at all. maybe WAY down the road, but fist and foremost I'm doing tint, converting to powere locks and getting keyless/alarm/remote start. I might even get a small plow for winter.

no kidding! Mines not as high as a ZR2 but it sets about the same as a ranger 4x4. It came with 235/70/15s but the previous owner upgraded :D

OK, so many of you have no clue who I am and most of youd don't care. I was an Elite member a couple years ago with a 93 sport rocking 32s. I traded it in for a cavalier because I was doing alot of driving and couldn't deal with 12mpg (and didnt have money to regear). Fast forward to this...

Check this out, it came down the pipeline today, Michigan is offering WiFi in some of its state parks, namely Ludington and Mears (both near Silver Lake Dunes) http://www.michigan.gov/wifi

not what i wanted to see....... ....besides, my niples are too sensitave as it is. my girl is getting hers done though..... .....ya never know, with the record deal she just got, she may end up being the next "wardrobe malfunction" LOL

thats just painful to think about. i have ALMOST ruled out the PA but i still wnat to get something else pierced (just not sure what) and now i'm thinking about a tat.

...especially if you own a vibrating tiggler

ok, i just had my duh of the day. i went to autozone.com, entered your truck athis this is what i got: On your 1999 FORD TRUCK EXPLORER 4WD, the FLASHER is: FRONT SEATING AREA, DRIVER SIDE, BEHIND DASH, MOUNTED ON STEERING COLUMN " In addition, they list the flasher at 12.99

unfortunately i threw away my haynes and chilton manuals. if not under the dash, there is almost always on in teh cabin somewhere..sometimes on teh side of teh dash (requiring the door to be open), sometimes in teh glovebox. it may not always be obvious, and there is usually an access panel...

not certain, but have you checked the fuse panel under the dash? USUALLY that where they are found, and USUALLY its a round thing about 1.5" in diameter.

yeah see, it was my girl that actually talked me into gettingmy tongue done. her and my last gf both had theirs done and i know i benefited from it, so i fugured i would return the favor. the girl i'm with now is going to get her belly button redone (somone snagged it out a long time ago) as...

funny, of those who actually know me, none think that. my girl especially loves the tonguering.

damn. can we say high pain tolerance? Yeah, i had to take out my tongue ring when i got arrested & jailed for 3 days but i went and got it redone like 2 weeks ago. i HATE that first week.

look something like this?