bolts

2005 Sport Trac Adrenalin 4x4 225,5xx miles New front driveshaft (after lift) vibrates like crazy 40mph to 60, then NOTHING above 60. Driveshaft company says the shafts look fine, no issues, quality parts, proper lengths - but 2 bolts have backed out 2-3 threads on the front shaft. Tech notices...

Hey guys, I have a 1997 f150 with a 4.6l v8, recently I took the throttle body and off to clean the EGR ports that were clogged from carbon buildup, unfortunately when I tried to take off the EGR both bolts holding it in place broke off, now I need to go to a machine shop to get the broken...

I've been searching these past threads for a while with no luck: I am trying to find the specs on the bolts that hold down the cross bar in the back of my PIU. If anyone has a link or more information or clues as to how I can find these bolts (or their specifications) I'd appreciate it. Ive...

Hi All, I recently purchased an '08 Ford explorer (former government vehicle) it's got 80K miles and I don't have specifics on its maintenance besides it oil changes. I have two questions, what are some parts and areas or maintenance you recomend I check out and see if its been replaced or...

A couple of years ago I got the idea of replacing my throttle position sensor since it was the stock part. I gave up after rounding the philips screws. I then tired to use a dremel to cut a slot into the screw heads but that didn’t work out too well. Recently, my absolute throttle position...

2000 Explorer 4.0 SOHC 4x4 Auto. Need the set of three bolts/nuts that mount the front differential to the frame. I believe they are all the same from 1998 to 2001, and some SportTrac also fit. Email is sdwakaturtle and I am at hotmail. Thanks. Mine are rusted out & be be destroyed when I...

I want to replace my stock intake manifold bolts/studs with new ones... Any suggestions on where or what kind to get

Hi, just got a 2003 XLT and I'm excited to make it look more like a truck than a mini van like it currently does. I'm going to be putting some bigger LT tires on it and I'm in the process of removing the bulky mini van running boards. I have removed the plastic pieces and the flat metal boards...

I have a 2001 explorer I'm in the middle of doing the v6 to v8 swap. Over the very long course of this (my buddy deployed and the project went stagnant for a while) anyways bolts were lost and some were not labeled or have been separated from the labels. The next main things I need put on that I...

I recently dropped my transmission to replace the clutch. I am usually very good about labeling my bolts, but idiot me piled all the tranny bolts (one-at-a-time) on the table. I then noticed, a day later, that there are 5 shorter bolts (appx. 2.75 inches in length) and 3 longer bolts (appx. 3.25...

Hey guys, so i want to know what the thermostat housing bolts to. The thing is that i was trying to fix the thread where the three bolts go, but apperently the drill bit broke and its flushed into the hole, so if i take out the intake manifold, and say i take out the heads... Can i take that...

I shared this article on another page and thought it belonged in this category as well. I'm working on putting a 1956 F100 on top of a Ford Explorer and I ran into a nice little CHEAP secret online after searching my house for an hour looking for vinegar. Instead of that, for just $1.25, you...

Accumulator removal in an Aerostar.

Does anyone knows the size Bolts for the valve cover for a 1999 ford expolorer 4.0 sohc?

Greetings all, Owner of 98 Explorer V6 OHV, recently did upper intake gaskets and all vacuum hoses to fix lean codes. When I was reassembling the plenum, I fear I may have stripped one of the throttle body bolts. These are a set of four bolts, identical to the ones that hold down the coil...

I have been looking around but I could not find the torque specs for the bolts on the transmission pan for a 2004 explorer AWD . Can anybody with a manual tell me that ? My Haynes does not show the torque specs for the bolts... :rolleyes:

Explorer Sport rear tow hook - with brackets, bolts, nuts

Explorer Sport rear tow hook - with brackets, bolts, nuts

recently(staring abot a month and a half ago) i started noticing a clunk when acclerating and declerating. also when at a speed and you punch gas and let off a loud thump is heard. i though this was the u-joints but i checked them and didnt notice any problems. i have been sdriving it for a week...