reverse

reverse sensor turns off when vechicle put in reverse

my gf has a 1998 ford explorer with around 180,000 miles on it. the tranmission has always shifted roughly, but recently i have lost the ability to shift the car into park when i get home. I was able to go to reverse until today. I have to start the truck in neutral and push it backwards to get...

Yesterday I found that I had no bulbs in my Reverse light sockets. (Just bought the car less than a month ago). I looked up the bulb number on this site and then wen to AAP and bought some put them in and tested that they worked. Well today as I was leaving church a buddy of mine txted me and...

My trans slips when in reverse going up a hill or in any situation that puts a load on the vehical... like in mud. Going forward up steep hills no problem. There are no unusual noises. Any idea of what the problem could be? I recently had the trans rebuilt. The shop assures me it is not...

Hello I have a 2000 ranger 4x4, 4.0 (Not sohc), 5r55e trans, 97,000 miles mainly highway, very few in 4wd Recently the truck would clunk when going into reverse, but everything worked ok. Today reverse stoped working, no warning or hesitation, just stopped. Manual first works fine as...

My trans will not engage in reverse when cold. This condition never occurred when I was in SoCal or Las Vegas for 10 yrs. The ambient temp was always above 55 degrees. When I came to NJ in the last few months, as soon as the temp dropped below 35-40 degrees the trans won't go into reverse unless...

Hey guys, First off let me say I am new to this site so if this has been discussed already I am sorry but couldn't find anything searching the forums. I just bought my third 1993 explorer (eddie bauer) I have always had the idea of flush mounting flood lights in the rear tailgate above the...

Since the comination of the new multi leaf springs and shakles outflexed the length of the stock shock, I flipped the mounts so they would curve up instead of down. In order to do this I had to make a notch on the old bottom and grind down the inner part of the shock mount so the shock could...