fordguy54113
New Member
- Joined
- February 24, 2009
- Messages
- 6
- Reaction score
- 0
- City, State
- Combined Locks, Wi
- Year, Model & Trim Level
- 1996 Eddie Bauer AWD
i have a 96 w/5.0 AWD ... i haven't driven it in a couple of months because i have a broken sway bar link and a ball joint that needs to be replaced and with all of the snow that we got in Wisconsin i was unable to change these. anyway i got those parts changed and took it out for a drive and all of a sudden i don't have reverse or neutral anymore. park ,OD,2,1 all work fine and when i am in neutral the truck goes forward. when i put it in reverse it makes a slight motion backwards but wont move. i tried adjusting the shift level linkage and that didn't work.. it moves the shifter part on the tranny fine.. my question is this tranny junk or could it be fixed? if its junk could i put a tranny in from a 2000 mountaineer? the Haynes manual says that they have the same tranny 4R70W? that one only has 102k where mine has 190k..