Countrygirl03
New Member
- Joined
- February 2, 2025
- Messages
- 3
- Reaction score
- 0
- Location
- Lawrence County Ohio
- City, State
- Waterloo,OH
- Year, Model & Trim Level
- 2004 Ford Explorer Sport
Hi All, I have a farm and only use my Fords, have worked on them alot by teaching myself but this has me lost. My best friend gave me the truck because of my health and really need help with this one.
Since I had it there was always problems pumping gas, I thought the gas hose was small or something but one night it would crank and start but would not idle. I immediately got a check engine light and gas cap light replace the gas cap light and has several codes I had to have the truck towed to a local garage to where they rest the idle, they told me my computer PCM was bad ordered it took it to the Ford dealership to have it installed to my truck they told me my old PCM was working just fine. She immediately was burning gas more and she would have a hard time idling then would die in the middle of driving. I replaced the idle air control valve the EVAP emerged system purge valve circuit the vent control and put on a new mass flow sensor brand new battery new spark plugs the Etc electronic throttle control the throttle position sensor put a new radiator in it fuel filter and heater control valve brand new gas cap brand new shut off sensor switch and still no change. Fuel pump is getting power but no gas to engine?Check the Emissions System the EGR everything is good, now she will crank but won't start. The codes I'm still getting is P0443 and P0446 can anyone PLEASE HELP! Thanks
Since I had it there was always problems pumping gas, I thought the gas hose was small or something but one night it would crank and start but would not idle. I immediately got a check engine light and gas cap light replace the gas cap light and has several codes I had to have the truck towed to a local garage to where they rest the idle, they told me my computer PCM was bad ordered it took it to the Ford dealership to have it installed to my truck they told me my old PCM was working just fine. She immediately was burning gas more and she would have a hard time idling then would die in the middle of driving. I replaced the idle air control valve the EVAP emerged system purge valve circuit the vent control and put on a new mass flow sensor brand new battery new spark plugs the Etc electronic throttle control the throttle position sensor put a new radiator in it fuel filter and heater control valve brand new gas cap brand new shut off sensor switch and still no change. Fuel pump is getting power but no gas to engine?Check the Emissions System the EGR everything is good, now she will crank but won't start. The codes I'm still getting is P0443 and P0446 can anyone PLEASE HELP! Thanks