33s too small?

[moreash14]

Do you guys think 33 s would look to small if I did a spindle lift truck already has 3 inc body lift 2 in tt and aal

 

[tenny]

Do you guys think 33 s would look to small if I did a spindle lift truck already has 3 inc body lift 2 in tt and aal

NO, 33s would look ok.....but 35s would look better

you may have to SLIGHTLY trim at full lock with 35s.

what gear ratio do you have on your truck...??

and what size tire you running now...??

 

[OffTrac]

I don't think I'd downgrade brakes and run 35s.

33s should be fine. How opposed to turning down the torsion twist and removing the AAL are you if you get them mounted and you realize that they are too small for your taste? That should answer the question for you.

 

[FROADER]

33s will look tiny on a 8" lift.

 

[tenny]

"lower the truck"....!!!!!!!!!!!!!!!!!!

ARE YOU INSANE!!!!!!!!!!!!!! haha

the difference in the brakes are 1in smaller.....hardly enough to make
a difference AT ALL.....

33s to 35s......??? hardly a difference at all

this is my 2cents ahhhh

 

[moreash14]

thanks guys my gear ratio is 4:10 and running 33 km2s i wouldnt be opposed to to takeing the aal out and lowering the torsion bars. after seeing the white st on 35s its all i can think about lol

 

[05dakotatrac]

Save money for ball joints and wheel bearings I have a feeling they will be high wear even more then they are now

 

[shooterdude199]

i have spindles and bl and with 33's and it looks alright. im bumping up to 295/70/18s (34.5). here is the most recent pic i have of it.

 

[OffTrac]

Well, there's the answer. It looks really good.

I keep forgetting you added a body lift.

 

[FROADER]

That picture and add 2" for the TT the OP has.

 

[shooterdude199]

Do note I still can add about 3" more of lift. So I know I can clear 35s easy.