whdahel
Active Member
- Joined
- February 18, 2007
- Messages
- 63
- Reaction score
- 1
- City, State
- Ohio
- Year, Model & Trim Level
- 98 Mountaineer <--- 5.0
has any 1 in here ever tried to install a 351 cleveland in a ranger? I have the engine and trans sitting in the garage and I was thinking of transplanting them in to a stang, but the more I think about it , it would make a sweet power plant for a ranger.
I know If I where to do it I would probably need a fox body oil pan, front springs and beef up the frame, and the fire wall might have to be trimmed.
I am assuming that all the v6 ranger came with the 8.8 so the rear end "might" be ok.
Any of you have any ideas of what else I should be concerned about?
What would be the best years for a donnor truck? I was thinking early 90's.
Thanks for any ideas!
I know If I where to do it I would probably need a fox body oil pan, front springs and beef up the frame, and the fire wall might have to be trimmed.
I am assuming that all the v6 ranger came with the 8.8 so the rear end "might" be ok.
Any of you have any ideas of what else I should be concerned about?
What would be the best years for a donnor truck? I was thinking early 90's.
Thanks for any ideas!
