MARTY196
Well-Known Member
- Joined
- March 4, 2002
- Messages
- 290
- Reaction score
- 0
- City, State
- Albuquerque,New Mexico
- Year, Model & Trim Level
- 1992 XLT
Okay yesterday while driving on paved road somehow the cable going from the clutch master cylinder and pluging into the tranny slave cylinder came disconnected. so I had to get towed home I thought at first something majure (sp?) happened I could not push the clutch peddle down at all it was really hard. got under there today and found it was disconnected well so I connected it back up but now I can't get it to build pressure back up. I bleed the system but nothing was comming out of the bleeder and I kept doing this for at leat 20 to 30 min and it would only like spit a little brake fluid out so I was wondering is there a way to find out which one is bad/ the master cylinder or the slave cylinder? oyah if i leave the bleeder closed and keep pumping the peddle i would have to fill the reservior up at least one and a half times but still no pressure and its not leaking out anywhere i can see, like the slave cylinder or hoses even checked in the cab by the peddle. any ideas???? sorry this is so long but i'm stumped