Hunterlanigan
Member
- Joined
- July 3, 2016
- Messages
- 14
- Reaction score
- 0
- Location
- mount Vernon ohio
- City, State
- Mount Vernon,ohio
- Year, Model & Trim Level
- 00 ford explorer xlt v8
My vehicle is a 2000 5.0, I have aquired the two codes p0113 p0102, and I am not sure what is causing it! It runs awful, with the maf connected it has no high end power at all, with the maf unplugged it gains some of the high end power back buy revs slow, and has no low end power and bogs. I have tried at least 4 maf sensors, replaced the egr pressure feedback sensor(which was burnt up), cleaned the iac, fixed 4 vacuum leaks, recharged and oiled my kn filter, replaced coolest temp sensor, checked pcv valve did plugs and wires, gaskets seem fine but no fix, before the connector for the tps sensor there are little pin holes on all 3 of the wires for it, looks like they are from a multi meter test, could that be the problem?, could it be a ground? Or could my cold air intake be the problem? Please help me find out what this is, thank you