swamper8
New Member
- Joined
- November 24, 2007
- Messages
- 8
- Reaction score
- 0
- Year, Model & Trim Level
- '87 BroncoII
This is my first post to this forum so I'll try to make it a good one. First of all let me say that I appreciate all the hard work put together by your posters and moderators; I've been through the al4d valve body rebuild and transmission rebuild and the amount of work and pictures are amazing. OK, I am rebuilding the a4ld from a 1987 BroncoII and I need a correct diagram of the valve body parts. My problem started after I bagged the valves and cleaned the valve body I went by my ATSG manual and thought I had mixed up baggies because the valves I had in the 3-4 shift valve bag didn't match the diagram in the book. Thinking I had screwed up I started pirating springs from other bags and before long I had a real mess. Long story shorter, the diagram in the book is wrong. I retrieved a diagram for a 1 solenoid valve body from Transgo and their diagram shows three springs for bore 202 and I have only two that will fit. I have a hunch that one spring may not have been used in all applications. Can anybody help me out?