BonesDT
Elite Explorer
- Joined
- July 12, 2002
- Messages
- 1,074
- Reaction score
- 8
- City, State
- Westchester, NY
- Year, Model & Trim Level
- Red '99 Sport SOHC 4x4
Do you have the 8.8? Does it have a sensor in the pumpkin?
I like the idea of using the older 1354m's gear driven VSS to send the signal for the ext housing OSS sensor. You would probably have to design a little circuit to translate the output. Another idea would be to use the crankshaft speed sensor and your comp would just think you were in 4th gear all the time (1:1 ratio). I tried to use this idea to fool my comp when I swapped out the auto trans, but I confirmed the 5R55E's input shaft speed sensor's cog had a different amount of teeth than the output shaft speed sensor's cog.
I like the idea of using the older 1354m's gear driven VSS to send the signal for the ext housing OSS sensor. You would probably have to design a little circuit to translate the output. Another idea would be to use the crankshaft speed sensor and your comp would just think you were in 4th gear all the time (1:1 ratio). I tried to use this idea to fool my comp when I swapped out the auto trans, but I confirmed the 5R55E's input shaft speed sensor's cog had a different amount of teeth than the output shaft speed sensor's cog.