got my HID kit finally | Page 4 | Ford Explorer Forums

  • Register Today It's free!

got my HID kit finally

thats true i did leave out the ballasts and everything. my point was that they can be installed on any car. here is where the flowlighting ones can be purchased driectly from flowlighting (owned by the people at oznium)
http://www.oznium.com/hid
 



Join the Elite Explorers for $20 each year or try it out for $5 a month.

Elite Explorer members see no advertisements, no banner ads, no double underlined links,.
Add an avatar, upload photo attachments, and more!
.





Rage1973 said:
Why can't they have something like this for Ford Explorers.
I think he is referring to the Sylvanin Xenark headlights that were in the F-150. They are designed for HID,
 






celly said:
Actually, they're 2 bulbs, 2 ballasts and 2 ignitors (AK's kit). My setup actually has an upgraded harness. Lots of back and forth arguments about the need for a better harness. I'm of the opinion that it can't hurt.

I did a review here.

Also did mine with a better harness. But for other reasons.
 






how are they holding up? im ready to order mine!
 












for those interested, on the explorer (mine is 1998) the funny inner headlight reflector thing can stay in there even with bi-xenon globes (the fatter ones) that have both hi and lo beam pattern.

The light cut off pattern is great - just like stock, and not a single person has ever hi-beamed me at night (if they do though - i will not hi-beam them back as once i did that in the past with 90W*2 h4low + 130W*2 h4high + 100W*2 driving lights + 50W*2 fog lights and the guy drove off his side of the road right at me as he was blinded, and i had to drive around him - then i dont think he made the next corner!)

anyway – I now have 35Watt 4300K HIDs and they are far better for normal driving than all that other light, the only time you can use all the other light is on a long straight road about 2 miles away + you need to run about 200amp alternator + it stalls the car at idle or the light go dim + diminishes your fuel economy + melts the wiring + you need relays that die every few years.

One question is – how long do the standard polymer headlight lenses stand up to the extreme UV light that the HIDs put out? Do they go cloudy over time?
 






Featured Content

Back
Top