trozei123
Well-Known Member
- Joined
- March 1, 2015
- Messages
- 106
- Reaction score
- 3
- Year, Model & Trim Level
- 1992 Explorer XLT 4x4
I hope i haven't messed up big this time. I have been dealing with a high idle issue that i traced to the iac. I tried soaking it overnight in carb cleaner after taking the electrical motor part off. When i put it back together, the idle went even higher. Before this cleaning, every time i drove and shifted into park, the idle rose to about 1250 or so. After this cleaning, it is now just around 2000. Does this mean the iac is dead?
One remedy i did before this cleaning was to just leave the iac disconnected. The idle was perfect then. However, after this cleaning round, when i unplugged it, the idle is still around 2000. How can I get the idle back to normal?
One remedy i did before this cleaning was to just leave the iac disconnected. The idle was perfect then. However, after this cleaning round, when i unplugged it, the idle is still around 2000. How can I get the idle back to normal?