Integrating plain & electric seats from '91 & '93

[saxon]

My 1991 seats are perfect but boring; the 1993 are cool (electric) but the fabric is stained and ripped in a few places (on both seats) and the front bolster on the passenger seat is not really attached to anything.

Can I disassemble the seats and swap the cushions and fabric from the 1991 onto the 1993 electric seat frames? Or the better question is not "can I?" but rather if I do that, will the 1991 cushions and pads bolt back onto the 1993 electric seats? I like the electric seats but they look really bad.

Both of the Xs are EB editions, both have beige seats, and both have the inflatable lumbar thing inside.

 

[410Fortune]

i would say yes they should be almost the exact same

However its gonna be a bit of work, you may consider finding some later model seats for el cheapo, I( see then at the local junk yards go for $20 (cloth) and $50+ ea leather....

Youcan swap the electric frames for the manual for sure.

 

[apcom]

The track on the 1991 none power seat is not the same as the 1993 power seat,How do I bolt them to the floor?

 

[little x]

The floor pan was changed after 91. Its easy to swap the seat rails, but it won't bolt up.