For the front I built strut spacers.
I had to remove an inch off the 3 front differential mounts and them grind a slot in the top strut mount to get rid of the positive camber.
You have to use
OEM axles otherwise they just blow apart.
In the rear I used 1990 Nissan pathfinder springs with a
2 inch spacer on top.
I replaced the rear shocks with some I had left over from a jeep YJ build.
The wheels are also left over jeep parts.
Roof rack is off a ford escape no boundary edition.
Front brush guard is off a Toyota that I cut and welded to fit.
Overall with the new wheels I have less than a $1000 in this build Including the purchase price of
mpv.
Pic of strut
http://thefamilygallery.com/gallery3/index.php/Mazda-MPV/WP_20151216_21_44_30_Pro