alohamonte
Well-Known Member
- Joined
- October 4, 2007
- Messages
- 784
- Reaction score
- 4
- City, State
- Glendale, AZ
- Year, Model & Trim Level
- 1998 Explorer 4.0 4x4
I have 31x10.5 on stock rim with no lift and i get minor rubbing at full lock.
I have the gangster lean condition. I measured the height of the exporer in two places, the distance between the top of the tire and fender and the ground to the fender. parked on flat surface, 1/4 tank of gas, and no people or cargo inside. here's the results.
driver front - 4 1/2 and 33 1/2
pass front - 5 1/2 and 34 1/2
driver rear - 3 3/4 and 32 3/4
pass rear - 4 1/2 and 34
so it is 1/2 inch higher in the front and 1 inch higher on the passenger side.
Plan A is warrior shackles and then even out the front with TT screw. I'm shooting for a rear height of 36 with a slight rake, about 35 1/2 front height and even out the left/right lean.
I have the gangster lean condition. I measured the height of the exporer in two places, the distance between the top of the tire and fender and the ground to the fender. parked on flat surface, 1/4 tank of gas, and no people or cargo inside. here's the results.
driver front - 4 1/2 and 33 1/2
pass front - 5 1/2 and 34 1/2
driver rear - 3 3/4 and 32 3/4
pass rear - 4 1/2 and 34
so it is 1/2 inch higher in the front and 1 inch higher on the passenger side.
Plan A is warrior shackles and then even out the front with TT screw. I'm shooting for a rear height of 36 with a slight rake, about 35 1/2 front height and even out the left/right lean.