93_Exploder
Member
- Joined
- June 25, 2005
- Messages
- 21
- Reaction score
- 0
- City, State
- Minnesota
- Year, Model & Trim Level
- 00 Eddie Bauer 4.0
I have a 93 Explorer 4-door 4x4 and want to do a decent (4-6") lift. I have searched and read up on what a lot of people have done. Cost is a HIGH factor in doing this lift since it is just my summer off road fun truck and winter vehicle. I plan on doing a SOA conversion for the rear and I'm trying to figure out what I need to do to get the front end level. Right now it has a little sag in the rear so I thought I might want the back end about 1 inch higher lift than the front. I will have 30-32" tires put on after the lift is done.
The question I really have is what do I have to do to get the front suspension lifted. Will a set of brand new F-150 springs with spacers work or do I have to get some skyjacker springs or what? Thanks for your guys help
The question I really have is what do I have to do to get the front suspension lifted. Will a set of brand new F-150 springs with spacers work or do I have to get some skyjacker springs or what? Thanks for your guys help