My 2nd gen ex SAS

[QuietRiot25]

just so i'm clear on this when you say flip your leafs thats putting the leafs over the axle right? because i was totally thinking that was my option for lifting the rear but if it moves back 5" is that going to be a problem for clearance in the rear at all with the fenders? i dont wanna have to hack up my truck

haha thank you so much i lost sleep over seeing this beast as a final product, definitely one of the most badass rigs i've seen in a while!!!

 

[gmanpaint]

just so i'm clear on this when you say flip your leafs thats putting the leafs over the axle right?

No, it means to turn them 180*, so the front bushings become the rear bushings. The center pin that holds the packs together is not centered in the packs. One side is longer than the other by 5+".

 

[trogg]

Latest and greatest

 

[97V8AWD]

man thats awesome. Im jealous.

 

[TarHeel085]

looks awesome man!! mind getting a better shot of your trimmed your front fenders? yours look much better then the BS i came up with. And whats your wheel base, it has to be around 110" or so, mine is 105 with a 3" front stretch.

 

[trogg]

looks awesome man!! mind getting a better shot of your trimmed your front fenders? yours look much better then the BS i came up with. And whats your wheel base, it has to be around 110" or so, mine is 105 with a 3" front stretch.

my wheelbase is 112 inches

 

[wickedrigs]

Which steering box was used...looks familiar, but I just want to be sure. Thanks in advance!

 

[OffTrac]

I would love to see the front trimming a little closer. Looks very well done and a solution to one of my concerns.

Good thread and awesome truck.

 

[trogg]

I used a 79 f150 steering box, ill take some pics of the front end in a little bit

 

[trogg]

well, all I need now is a trailer lol

 

[brnbomr]

nice. can you explain the steering box setup a bit? and who makes the weld on bead locks you have?

 

[trogg]

well, going over a bunch of little things right now...life has sort of got in the way of play time. I have a hydro assist system half put in, and a new trans wiring harness sitting in a box next to it...I will get to it I swear..